top of page
Optimize your server room with AMR.
Mighty-D4S
Autonomous mobile robot for transport that enables server room optimization
Mighty-D4S
Designed for use in server rooms, Mighty-D4S complies with the VCCI Class A EMC industrial standard.
This AMR performs low-noise automatic transport and follow-up travel to improve the efficiency of server room operations.
Mighty-D4S Basic Performance
.png)
EMC industrial standard
VCCI Class A
*Tested
Enhanced transport capability with optional units
Mighty-D4S offers an optional unit that can transport 1U/2U servers and equipment built-in.
It is also possible to run another 1U/2U server or equipment on the top panel of the optional unit.
Flexible shape transport with belt fixation
The optional unit is equipped with belt holes for simple fastening, allowing for the transport of equipment of any shape.
This allows the Mighty to be loaded with minimal effort, thus contributing to a reduction in work time.
.jpg)
Payload capacity
The Mighty-D4S can carry loads of up to 50 kg on its top panel.
In addition, the Mighty-D4S can carry 200 kg when equipped with towing equipment (the total weight that can be carried is 200 kg (top panel + towing equipment)).
Excellent traveling performance
The Mighty-D4S, based on lunar exploration rover technology, has the same driving performance as the D4. It can overcome bumps of up to 12 cm. It is also capable of climbing angles of up to 15 degrees. The Mighty-D4S can travel stably over uneven pathways such as stepped surfaces and cable braid.
Autonomous traveling patrol
Mighty has a total of four built-in cameras, front, back, left, and right. Another camera can be added. Autonomous driving in the server room enables monitoring operations for early detection of system anomalies.
Visual confirmation of equipment status in real time, even from remote locations, reduces the burden on maintenance staff and allows for a more accurate monitoring system.
Transport support by follow-up driving
Mighty can follow behind the operator while checking the position of walls and racks with its follow-up traveling function that uses LiDAR and cameras. The top panel of the optional unit can also be used as a work platform for maintenance kits and PCs required for maintenance, contributing to improved work efficiency and safety during server replacement and maintenance work.
The color and body can be changed to suit the customer's application.
Body customization
Product Overview
Body size
70 x 55 x 65 (cm)
Body weight
35kg
Payload
Approx. 50kg
Towing Weight
Approx. 200kg
Assumed Operation Time
6~8 hours
Steps that can be overcome
12cm
Travel speed
Max. speed approx. 10 km/h
Direction indicator
Equipped with blinkers
Dynamic performance
In-situ turning and lateral movement
Climbing ability
15 degrees
Autonomous driving
LiDAR, GNSS, camera
Follow-up travel
LiDAR, camera
.png)
.jpg)
Transport of batteries and servers
.jpg)
Transportation of materials
%20(1).jpg)
Security and patrol
bottom of page